![]() Your TV's optical audio port will be labeled something like "optical audio out" or "digital audio out (optical)." It should be square-shaped with a roundish flap that will push in when you connect the optical cable, and it may even have a red glow to it because of the way optical cables work. If your TV is getting long in the tooth, you'll need to use the optical audio output on the back or side of your TV instead. Like your soundbar, your TV should have an HDMI port that's labeled "ARC" or "Audio Return Channel" or, if you have a newer TV, it may say eARC (more on that below). It very likely does, but better to know your situation from the get-go. You'll also want to figure out whether your TV has ports that will work with a soundbar. The other HDMI port (if there is one) is actually for plugging in outboard video components like a 4K Blu-ray player or gaming console, which may be useful if you're trying to send high-quality audio formats such as uncompressed Dolby Atmos to your soundbar directly. Some soundbars have more than one HDMI port, but the proper one to connect to your TV will have the words "HDMI ARC" or HDMI eARC in some form. You don't need expensive or fancy cables, especially when they're only running a foot or two between the TV and the soundbar. You can get an an HDMI cable for around $10 and we've even got a list of our favorite HDMI cables to help you shop. ![]() If you just bought a soundbar, those cables are usually already in the box, but some companies will skimp on an HDMI cable. Pretty universally, you'll be connecting your soundbar to the TV via an HDMI cable (generally preferred) or an optical cable, sending digital audio out from the TV. Here's everything you need to know about connecting and optimizing a new soundbar so you can upgrade your setup the right way. While the answer is almost certainly "yes," there's a bit more to it. Whether you just bought a new 4K TV and need an audio system to match, or you just can't stand another movie night at home with subpar sound, you'll need a soundbar to take things to the next level.Įven if you haven't bought a soundbar yet, you may be wondering if your TV is equipped for one-a fair question. Also, some TVs can’t process DTS signals through HDMI ARC-in these cases, set your source device to output Dolby Digital.There's never been a better time to buy a soundbar. Note that the soundbar must be able to decode the bitstream signal in order to get proper sound pretty much all soundbars can decode basic Dolby Digital surround sound, but many can’t decode DTS surround sound or more immersive formats like Dolby Atmos and DTS:X. ![]() Some TVs and source devices have an “auto” option for digital audio output, which should be a safe bet. Many devices (especially TVs) default to converting all these signals to a two-channel PCM digital signal (the same as used for CD), which may cause the first few seconds of audio in a movie or TV program to cut out. The bitstream option, available in the audio setup menu of your TV and source devices (see photo below), sets the device to send the exact digital signal encoded in the program, be it Dolby Digital, DTS, Dolby Atmos, stereo audio, or the like. This setting determines whether the digital audio signal is decoded in the device (the TV or Blu-ray player) or in the soundbar. Try the bitstream audio output setting on your TV and source devices.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |